定标粒子理论预测乙醇－水体系汽液平衡盐效应

测定了７０℃下３个１－１型电解质（ＮａＣｌ、ＮａＢｒ、ＫＣｌ）在各种不同浓度的乙醇－水体系中的汽液平衡盐效应参数，并给出用定标粒子理论计算盐效应参数的方法。硬球作用项采用Ｍａｓｔｅｒｔｏｎ－Ｌｅｅ方程，软球作用项采用胡英的径向分布函数。分子间力在Ｌｅｎｎａｒｄ－Ｊｏｎｅｓ位能函数基础上计入偶极－偶极、偶极－诱导偶极、电荷－偶极、电荷－诱导偶极的贡献，其中离子－分子间的静电作用项仅限于规则排列的第一配位圈之内。将混合溶剂的局部介电常数视为液相浓度的函数，函数关系由实验拟合。在乙醇浓度变化的很大范围内，３个体系的预测与实验结果基本相符。     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

Thermodynamic behavior of adsorption systems with porous adsorbents along the curves describing equilibrium between bulk phases of an adsorptive

The thermodynamic aspects of adsorption equilibrium in systems with crystalline, liquid, and dense gas phases have been considered. The heats of phase transition and corresponding directions of mass transfer from the adsorbed phase into crystalline and liquid phases at different temperatures have been determined. The general equilibrium diagram in the coordinates Inp-T ^–1 has been given with indication of the equilibrium lines of three-phase systems and characteristic points on the isosteres of adsorption,viz., the Gurvitsch and quasicritical points.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1480–1485, August, 1995.     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

三甲基铝双聚体和单体的气相离解-缔合平衡模拟计算

在B3LYP/6-31l++G(3df, 2pd)水平上全优化得到了三甲基铝双聚体(d-TMA)的C2h和C2v两种构型和单体的C3h结构. 着重用完全基组方法CBS-4M模拟计算了TMA气相平衡中各物种在1.01×105 Pa和300～550 K范围内的热力学函数值. 通过考察d-TMA三线态构型和异裂反应对系统熵值的影响, 准确计算了d-TMA离解反应的ΔrHm和ΔrSm. 以lnKd对1/T作图, 两者之间具有很好的线性关系: lnKd=−9624.4363/T+20.2303, 相关系数R2=1.0000, 与前人实验结果相当一致. 在此基础上提出了新的d-TMA气相离解-缔合反应机理.     

A potentiometric investigation of the hydrolysis of chromate (VI) ion in NaCl media to 175°C

The hydrolysis of chromate ion was studied potentiometrically in a concentration cell fitted with hydrogen electrodes by titrating basic NaCl–Na₂CrO₄ solutions with standardized HCl against a NaOH reference solution. The temperature was varied from 25 to 175°C at 25° intervals at the following ionic strengths (I): 0.1140, 0.2346, 0.5337, 0.9988, 2.940, and 5.239 (NaCl). Depending on the ionic strength, the molality of total chromium was varied from 0.001 to 0.100. The resulting titration curves could be resolved best in terms of three equilibria involving the formation of HCrO ₄ ^– (aq), Cr₂O^3– (aq), and CrO₃Cl^– (aq). The equilibrium quotients for all three reactions were fitted as a function of temperature and ionic strength, and the molal thermodynamic parameters that were computed from these relationships are tabulated at specific ionic strengths over the experimental temperature range.     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.     

EDL configuration on a dissimilarly charged protrusion array via double Fourier series and perturbation method

In this study, through the extension of an one-dimensional, dissimilarly charged protrusions surface model set up in our previous work, a novel dissimilarly charged protrusion array (DCPA) model immersed in an electrolyte solution, which could simulate realistically both the surface morphology and the surface charged condition profoundly concerned on a biological cell membrane, or on the surface of a micro-scale, modified particle used in biomedical engineering and water treatment, is proposed. Considering the condition of small protrusions, the electrical potential field due to the electrical double layer (EDL) on DCPA model is solved semi-analytically using both the double Fourier series and the perturbation method. The analysis from the numerical result reveals that, a small, dissimilarly charged protrusion can lead to a steep variation in the local EDL configuration, especially compared with that in the condition when the charged surface is taken roughly as a flat surface using a lumped, mean surface charge density.     

双嵌段共聚物薄膜介观结构的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative Particle Dynamics, DPD)方法模拟两平行平板间的双嵌段共聚物体系的介观结构. 模拟结果表明, 随板间距的增大, 体系分层数量的增加是不连续的, 在分层数量的增加过程中, 出现不规则结构的过渡区；聚合物链末端距随板间距的增大呈周期性振荡, 振荡幅度逐渐减小. 对模拟结果的分析表明：层状结构转变点与分层数量之间存在近似线性关系；层状结构转变点近似与共聚物链长的2/3次方成正比.     

Monte Carlo simulation of colloidal membrane filtration: principal issues for modeling

The principal issues involved in developing a Monte Carlo simulation model of colloidal membrane filtration are investigated in this study. An important object for modeling is the physical dynamics responsible for causing particle deposition and accumulation when encountering an open system with continuous outflow. A periodic boundary condition offers a solution to the problem by recirculating continuous flow back through the system. Scaling to full physical dimensions will allow for release of the model from flawed assumptions such as constant cake layer volume fraction and thickness throughout the system. Furthermore, rigorous modeling on a precise scale extends the model to account for random particle collisions with acute accuracy. A major finding of this study proves that forces within the colloidal filtration system are summed and transferred cumulatively through the inter-particle interactions. The force summation and transfer phenomenon only realizes its true value when the model is scaled to full dimensions. The overall strategy for model development, therefore, entails three stages: first, rigorous modeling on a microscopic scale; next, comprehensive inclusion of relevant physical dynamics; and finally, scaling to full physical dimensions.